空气输送斜槽

AIR TRANSPORT FLUME

空气输送斜槽可在任何距离间散装地输送干燥松散易流态化的粉状物质，输送能力可达 1500m 3 /h 。该输送装置广泛适用于建材、冶金、轻化、粮食等行业中水泥成品、水泥生料、粉煤灰、面粉以及磨机、选粉机和窑的喂料等输送。对粒度大、水分多、流态化性能差的物料不宜选用。

该输送装置分为下充气层、中透气层和上输料层，由风机给与低压小容量的空气，由充气层内透过透气层，使物料流态化，从而实现物料的移动。

该装置能耗小、无噪音、无污染、无润滑、少维修，且输送能力大，轻便，不占用有效空间，布线灵活，容易改变输送方向。

空气输送斜槽只能在一定角度下向下输送，不能向上输送。若要向上输送，请选用空气提升器系统。风动溜槽的斜度，在工艺布置允许的条件下，采用较大的斜度对输送有利。其斜度一般为 4 ～ 6% ，输送粗料时，建议斜度不小于 10% 。

The device can transport dry fluidity powder material in any distance. The transport ability is 1500m 3 /h. It is widely used in building material, metallurgy, light chemical and feed industries etc to feed or transport cement, powder coal and flour of milling and stove. But it is not suitable for the material of great granularity, big washiness and bad fluidity.

The device is divided into three layers. Puff layer is below the device, transport material layer is above and ventilate layer is in the center of device. Low pressure and little volume air supplied by wind machine flow from puff layer to ventilate layer, making the material flowing and realize the moving of material.

It has the features of little cost of energy, no noise, no pollution, no lubrication, low maintain ratio, high carrying ability, lightweight, saving effective place, agility to dispose wire and easy to change transport direction.

It is only can transport in certain angles, not upwards. Otherwise please choose air-elevating system. Great obliquity is good for transporting if the technics disposal permits. Obliquity is always 4 ～ 6%. Commendatory obliquity is more than 10% when transport coarse material.

适宜输送的物料：                                     外形图：

Suitable transported material:                              Appearance figure:

外形连接尺寸：

Appearance joint dimension: